Sewing Machine Shank Types

The type of sewing machine you have or own will determine the type of sewing machine shanks on hand. Lots of manufacturers in the sewing machine industry have created shanks of different sizes. There are different types of sewing machine shanks in existence, namely: slant shank, high shank and low shank. Each of these presser foot shanks has its dimensions and practical use; therefore, it is important for you to be knowledgeable about their sizes before buying one for your sewing machine.

Sewing Machine Shank Types

It goes without saying that the kind of foot that comes with a sewing machine cannot be interchanged. For instance, a high shank machine will only take on a high shank presser foot, etc. Having or using the wrong size of presser shank will result in an undesirable outcome since it is a complicated part of how the fabric being sewn moves under the presser foot as stitches are created. Even if you have misplaced the user manual of your machine, or you bought it fairly used, and it came with no handbook, you should be able to figure out the size of the shank that is ideal for your sewing machine. The best thing to do if you have lost the manual for your sewing machine is to get a replacement, for this will serve as an excellent point of reference when you need to replace or purchase new shanks for your sewing machine. For the best sewing machine go through sewing machine reviews as step guide

Each of these shanks will be examined one after the other:

Slant Shank

The slant shank is the least common shank, as it was only used for just a short time throughout the 1960s and 1970s for specific models of sewing machines known as Singer. As its name implies, this type of shank is somewhat slanted and is usually no more than 11/8 inches in size. Therefore, the models of sewing machines, such as Singer Featherweight and Husqvarna that make use of this type of shank cannot accept any other kind of presser foot.

Low Shank

The majority of the sewing machine models on the market today use this kind of shank, especially the sewing machine models created for domestic use. Low shank sewing machines, usually with measurement of ¾ inches, are manufactured for the specific purpose of meeting the needs of hobbyists and consumers, which is why they are the most common variety available.

High Shank

Industrial-grade sewing machines make use of high shanks, although they can be found on a limited number of home models namely Necchi, Bernina or Kenmore. The high shank usually measures between 1 and 1¼ inches in size.

How to Determine The Sizes Of Shanks

Determining the shank size of your sewing machine is not a difficult process. Follow this step-by-step guide to finding the size of your sewing machine shank:

1. Set down the presser foot on your sewing machine.

2. Using your tape rule, take a measurement from the center of the shank screw which secures the presser foot on the sewing machine to the throat plate of the sewing machine. If the measurement is approximately half an inch or less than one inch, it implies that your sewing machine is of the low shank variety.

3. But if it measures about 1 inches, then your sewing machine uses a high shank.

4. If it measures approximately 7/8 inches, you have a slanted shank.

Leave a Reply

Your email address will not be published. Required fields are marked *